Double Deflection Registers - Model WSD

Double Deflection Registers - Model WSD

Universal Outlets or Double Deflection Registers are generally used in sidewall applications. They consist of two separate rows of individually adjustable vanes.

The FRONT VANES are horizontal so the primary air leaving the outlet is directed above the room occupants and does not reach the occupied zone until well mixed with the secondary room air.

The REAR VANES are vertical and are used to direct the air in a straight blow or spread the air as required by the room layout. If required, air flow can be directed at an angle to one or both sides,and still retain a near-parallel air stream pattern.

Construction is all extruded aluminium horizontal and vertical blades, retained in a fixed or removable Core. Standard finish is powder coat white while other finishes are available to suit the interior and architectural design requirements.

Curved Face double Deflection Registers can also be manufactured to suit Spiral Duct Installations.

Double Deflection Registers can be manufactured in a wide range of sizes other than the stock sizes listed below.

    Model Number / Name
    ITEM # SIZE mm TYPE
    246150150SQ
    246200200SQ
    246250250SQ
    246300300SQ
    246350350SQ
    246600600SQ
    Double Deflection Registers - Model WSD
    Double Deflection Registers - Model WSD